Home

Headsets

Comas Tapered Headset

Tapered headset from Comas Trials. Semi-integrated conical headset that uses a 1.5 "lower bearing and 1-1/8" upper bearing.

Spacers

MSC adjustable aluminum spacer 12-18mm

STEPSC

€22.00

Adjustable aluminum spacer from MSC. Adjust the height from 12 to 18mm.

Chains

Chain KMC K1SL Gold

BI19-K1SL NARROW GOLD 100L

€45.00

Super light chain from Jitsie made by KMC.7.7mm pin width.Hollow pins and machined holes in plates saves a good portion of weight.

Grips

Comas foam grips 2mm

CB18-FGRP2.0

€8.00

Extra-thin medium density grips with 2mm thicknessCOMAS special foam compound that substantially improves grip and durability.

Breath rear hub 116mm (snail cams included)

Breath rear hub 116mm (snail cams included) 2

Out-of-Stock

Rear hubs 116mm

Breath rear hub 116mm (snail cams included)

€55.00

Breath rear hub, non disk, 116mm spacing. Body made of 6061-T6 aluminum. Axle made of 7075-T6 aluminum, 12mm diameter (reduced to 10mm at the ends of the axle, in order to fit into the frame).

View

Grips

Comas foam grips 2mm

CB18-FGRP4.0

€8.00

Medium density grips with 4mm thicknessCOMAS special foam compound that substantially improves grip and durability.

Breath rear disk hub 116mm (snail cam included)

Rear hubs 116mm

Breath rear disk hub 116mm (snail cam included)

€65.00

Breath rear hub, for disk brake, 116mm spacing. Body made of 6061-T6 aluminum. Axle made of 7075-T6 aluminum, 12mm diameter (reduced to 10mm at the ends of the axle, in order to fit into the frame).

Out-of-Stock

Cranks

Breath 7075 ISIS cranks

€59.00

New ISIS cranks from Asian manufacturer Breath. Made from high quality 7075 T6 aluminium. Super strong and great value. Available in 160 and 170mm length.

View

Rims 19-20"

20" Breath front rim single wall

€56.00

20" light front rim from Breath, made from extruded aluminum. Single wall with large rectangular holes to save weight. Width: 32mm. 28 holes. Light and strong.

Out-of-Stock

Handlebars

Breath carbon riser bar

€115.00

New, high quality carbon handlebar from Breath, for 2014.Fully made from Carbon Fiber, now with several unidirectional layers instead of crossed layers. 730mm long, instead of the standard 720mm to achieve higher stability, which is essential in a high-BB bike.

View

Rims 19-20"

Breath rear rim 19"

€59.00

19" light rear rim from Breath, made from extruded aluminum. Single wall with large rectangular holes to save weight. Width: 47mm. 32 holes. Light and strong.

Rims 26"

26" Breath front rim single wall

€56.00

26" light front rim from Breath, made from extruded aluminum. Single wall with large rectangular holes to save weight. Width: 32mm

Front Hubs 100mm

Breath front non-disk hub

€49.00

Breath front non-disk front hub. 28 holes. 100mm spacing, suitable for almost all forks available. Hub shell made from tough, high quality 6061-T6 aluminium. Anodized red 7075 T6 aluminum 10mm axle.

Disk brake rotors

Comas rotor 160 mm diameter FRONT

CB18-CODISC160

€39.00

Comas disk rotor designed for trial, diameter 160mm (for front brake)

Out-of-Stock

Rims 26"

Breath rear rim 26"

€59.00

26" light rear rim from Breath, made from extruded aluminum. Single wall with large rectangular holes to save weight. Width: 47mm

View

Front Hubs 100mm

Breath front disk hub

€55.00

Breath front disk front hub. 28 holes. 100mm spacing. Hub shell made from tough, high quality 6061-T6 aluminium. Anodized red 7075 T6 aluminum 10mm axle.

Out-of-Stock

Disk brake rotors

Comas rotor 160 mm diameter FRONT

CB18-CODISC160R

€39.00

Comas disk rotor designed for trial, diameter 160mm (for rear brake)

View

Cranks

Breath 7075 ISIS cranks v2

€96.00

New ISIS cranks from Asian manufacturer Breath.Made from high quality 7075 T6 aluminium. Light and strong.Available in length of 160, 170mm and 175mm

Out-of-Stock

Parts - maintenance

Comas disk brake protector

CB18-CODISCPRT

€15.50

Brake disc protector for brake discs of Ø160mm or less.One-piece CNC machining in high quality 7075-T6 aluminum.Compatible with axles of 10mm diameter.

View

Rims 19-20"

Comas light front 20" rim

CB18-FRRIM20

€37.90

Comasitsie light front 20" rim, 28 holes, 32mm wide.

Rims 19-20"

Comas light rear 19" rim

CB18-RRRIM19

€37.90

Comasitsie light rear 19" rim, 32 holes, 48mm wide.

Chains

Chain KMC K1SL silver

KBK1SLNN

€39.90

Super light chain from Jitsie made by KMC.7.7mm pin width.Hollow pins and machined holes in plates saves a good portion of weight.

Out-of-Stock

Freewheels

COMAS freewheel 108.9 18T v2

CB22-FW108.9-18T

€79.00

The COMAS 108.9 freewheel is a great quality freewheel featuring 108 clicks with 9 pawls. Available with 18 teeth.

View

Sprockets

Comas Titanium threaded sprockets

CB20-CSPR-12-15-TI

€40.00

Screw-on sprockets from Comas, made of TITANIUM. Available in 12 or 15 teeth. 11mm wide base.

Forks 20"

Clean High modulus carbon fork 20"

CL0200

€448.00

Constructed in high modulus carbón fiber, not only to get a really low weight, also to offer a great finishes, stiffness and strenght unbeatable.

Chains

Chain KMC X9 grey

KBX09GG1

€20.00

KMC Chain X9 grey - 114 links. Size : 1/2"x11/128".

Rims 26"

Comas light front 26" rim

CB18-FRRIM26

€39.00

Comasitsie light front 26" rim, 28 holes, 32mm wide.

Out-of-Stock

Cranks

Comas ISIS race Cranks

CB20-CRKISIS

€76.00

Great quality cranks from Comas. Made of strong and yet light 7075-T6 aluminum.Standard thread to fit a threaded freewheel.

View

Rims 26"

Comas light rear 26" rim

CB18-RRRIM26

€39.00

Comasitsie light rear 26" rim, 32 holes, 48mm wide.

Out-of-Stock

Handlebars

Comas trial riser handlebar 115mm

CB18-CHB115AL

€65.00

Trial handlebar made of 7075-T6 aluminum with exclusive geometry according to the new riding trends.Higher overall height and extremes with less angulation allowing greater mobility in driving.

View

Product available with different options

Cranks

Comas M15 ISIS cranks bolts

CB18-COCRKBLT

€13.00

Exclusive COMAS M15 Ultra-light bolt for assembling crankset / bottom bracket.On-piece CNC manufactured in aluminum alloy 7075-T6. For ISIS cranks.

View

Handlebars

Comas trial carbon handlebar 105mm

CB19-CHB105CF

€159.00

Trial handlebar made of Carbon fiber with special geometry according to the new riding trends. Higher overall height and extremes with less angulation allowing greater mobility in driving.

Out-of-Stock

Cranks

Comas ISIS std Cranks

CB18-CRKISIS

€56.00

Great quality cranks from Comas. Made of strong and yet light 7075-T6 aluminum.Standard thread to fit a threaded freewheel.

View

Stems 24"-26"

Breath stem v2

€89.90

NEW Breath stem v2. Forged and then CNCed. New clamp for bar. Available in 3 geometries: 150x30, 145x25, 135x25. Light and strong.

Out-of-Stock

Handlebars

Comas trial riser handlebar 105mm

CB18-CHB105AL

€65.00

Trial handlebar made of 7075-T6 aluminum with exclusive geometry according to the new riding trends.Higher overall height and extremes with less angulation allowing greater mobility in driving.

View

Stems 24"-26"

Handle bar / stem pad COMAS

CB21-STEMPROT

€11.00

Comas C-shaped handlebar/stem protector. Super light, great looking, available in 5 colors.

Pedals

Comas single cage pedals

CB18-PCAGEB

€49.00

Superlight cage pedals from Comas. Cage pedals offers maximum grip and performance compared with platform pedals, also you will save some weight.

Out-of-Stock

Pedals

Cages for Comas pedals

CB18-CGCAGEB

€18.00

Replacement cages for Comas pedals. Made of aluminum 7075, 3mm thick. Also compatible with Jitsie, Clean, Trialtech, Try-all and Hashtagg pedals.

View

Stems 24"-26"

Comas Stem 20 degrees angle

CB18-CSTM20

€45.00

Exclusive geometry of 140mm or 150mm in length and 20º of inclination which allows to have a lower center of gravity keeping the position of the handlebar (without negative angle)Design in forged aluminum 3D one-piece without welds.

Stems 24"-26"

Comas Stem 100x25

CB18-STM25-100

€39.00

Exclusive geometry of 100mm in length and 25º of inclination ideal for children. Design in forged aluminum 3D one-piece without welds. Front clamping with 4 screws that opens maximum contact between the handlebar and stem.

Tools

Hose Cutter

CC1672

€19.00

This little tool will allow you to cut your hydraulic brake hose nicely.

Out-of-Stock

Frames 26"

Breath YES 26" frame (headset included)

€395.00

Yes 26 trials frame from Asian brand Breath. Made from high quality 6061 T6 aluminium. Lot's of CNCed parts. Semi-integrated headset included!

View

Frames 20"

Breath YES 20" frame (headset included)

€395.00

Yes 20 frame from Asian brand Breath, tested and developed by top Chinese rider Zao Xuan. 129mm CNCd head tube, designed to use an internal headset (supplied with the frame) and with The head tube is gusseted to the top and down tubes to increase its strength. 4-bolt mounts spaced at 100 mm with an integrated CNC brake booster, to improve braking...

Frames 20"

Breath TOMORROW 20" frame

€589.00

Breath Tomorrow 20, the top-of-the-range 20 competition frame from Breath.Tested and developed for the last few months by chinese pro rider Zhao Xuan.Made from high quality 6069 aluminium, which keeps the weight down and still offers great strength. Semi integrated headset included.Innovative, exclusive design by Breath, with 3D hydro-formed tubing for...

Parts - maintenance

Racing Line Titanium pivot bolt

€7.90

Racing Line titanium pivot bolt. Torx hole. Color: black, gold our rainbow.

Out-of-Stock

Parts - maintenance

Titanium Racing Line M8 shroud nut gold

€3.90

M8 shroud nut for Racing Line or HS33 brakes. Made of titanium. Color: gold

View

Racing Line M6 Titanium barbed fitting 2

Out-of-Stock

Parts - maintenance

Racing Line M6 Titanium barbed fitting

BS008

€3.90

Titanium barbed fitting from Racing Line.Lighter than steel, but just as tough.

View

Racing Line M6 Titanium barbed fitting with o-ring

Racing Line M6 Titanium barbed fitting with o-ring 2

Product available with different options

Parts - maintenance

Racing Line M6 Titanium barbed fitting with o-ring

€3.90

Titanium barbed fitting from Racing Line with o-ring.Lighter than steel, but just as tough.

View

Out-of-Stock

20" trials Bikes (mod)

Comas bike ENTRY PRO 1008

CB22-ENTRY1008PR

€999.00

Comas Entry PRO 1008 full disk (Tektro) + ISIS bottom bracket.

View

Parts - maintenance

Hastagg H2O pivot bolt

BRKH2OLPB

€5.90

Hashtagg H2O brake laver pivot bolt.

Product available with different options

All clothing items

Shorts Comas black-white-grey

CB18-COSHORTSGR

€56.00

Comas technical short designed for trials. Super light, breathable material. Kids and adults sizes available.

View

Product available with different options

All clothing items

Jersey Comas red-black-white

CB18-COJERSEYRD

€35.00

Comas technical jersey designed for trials. Super light, breathable material. Kids and adults sizes available.

View

Product available with different options

All clothing items

Gloves Comas Race Black-White

CO19-COGLW

€30.00

Gloves designed for trials by pro riders. Kids and adult sizes. Super light and comfortable. They are extremely well designed.

View

Product available with different options

All clothing items

Shorts Comas RED-black-white

CB18-COSHORTSRD

€56.00

Comas technical short designed for trials. Super light, breathable material. Kids and adults sizes available.

View

Product available with different options

All clothing items

Gloves Comas Race Black-Red

CO19-COGLR

€30.00

Gloves designed for trials by pro riders. Kids and adult sizes. Super light and comfortable. They are extremely well designed.

View

All clothing items

Pants Comas black C+R

CB21-COBKPANTS

€46.00

Comas technical pants designed for trials. Super light, breathable material.

Product available with different options

Rider's protection

Comas chest/back protector 2.0

CO22-VSTGRD

€69.90

New COMAS ExtraLight protective vestguard ideal for using in Trials/Enduro/Cross/OffRoad.Tested and developed jointly with TrialGP rider Jorge Casales. Approval EN1621-2:2014 FB

View

Product available with different options

All clothing items

Gloves Comas PRO Red-Black

CO22-COGLR

€30.00

New generation of ultra-light COMAS PRO gloves with ergonomic fit and pattern.Ultra-smooth 'Nanofront' material on the palm for increasing control.

View

Product available with different options

All clothing items

Gloves Comas PRO Black-Grey

CO22-COGLB

€30.00

New generation of ultra-light COMAS PRO gloves with ergonomic fit and pattern.Ultra-smooth 'Nanofront' material on the palm for increasing control.

View

All clothing items

Gloves Comas PRO Yellow-Black

CO22-COGLY

€30.00

New generation of ultra-light COMAS PRO gloves with ergonomic fit and pattern.Ultra-smooth 'Nanofront' material on the palm for increasing control.

Home

First ISIS BB

€59.00

Bottom bracket First components for ISIS drive with 123 or 128mm long axle.

Out-of-Stock

Home

Racing Line TPA wheel

€7.90

TPA wheel for Racing Line brake levers or Magura's HS33 (2005 models). CNC'ed T6 aluminium, anodised red.

View

Out-of-Stock

Home

Grease for Racing Line piston

€6.50

Grease for Racing line piston. Made in the UK. Specially formulated for an optimal functionning of the piston. Jar containing 3g of grease.

View

Home

Hemispherical plastic bushings Racing Line

€4.90

Hemispherical plastic bushings from Racing Line. For Racing Line brake levers or Magura's HS33 (2005 model).

Product available with different options

Home

Racing Line slave cylinder black

€48.00

CNC'ed Slave cylinder from Racing Line. Will fit all generations of rim brakes.

View

Out-of-Stock

Home

Racing Line CNC piston v2

€9.90

Piston for Racing Line brake lever. Made from CNC'ed T6 aluminum. 2 O-rings (also available as spare parts).

View

Home

O-ring seals kit for Racing Ling lever v2

€6.50

Replacement O-ring seals for CNC Racing Line 14mm diameter v2 piston (will not fit the v1 pistons). Containt 2 o-rings + 2 nylon rings

Home

KMC chain Z1eHX

BI19-Z1eHX-NARROW SILVER 112L

€25.00

Very popular among trials riders.

Home

Reinforced KMC Kool chain K1 Narrow silver

KBK1NNP100

€23.00

Very popular among trials riders.

Racing Line slave cylinders Black (pair)

Parts - maintenance

Racing Line slave cylinders Black (pair)

SC15B

€96.00

CNC'ed Slave cylinder from Racing Line. Will fit all generations of rim brakes.

Showing 1-70 of 70 item(s)

iqitcookielaw - module, put here your own cookie law text