New sealed bearing 135 engagement point freewheel from Monty.
135 engagement points are achieved by using 3 offset groups of 3 pawls into a 45 tooth ratchet.
Each pawl is actuated with an individual spring, giving precise, reliable engagement.
Dual sealed bearing design gives great driveshell stability, as well as allowing a unique design that requires no lockring (the bearings are held in place using an external circlip), helping to save weight.
The freewheel width is kept to a minimum to by using BB-style removal tabs - this means the freewheel can be removed with a Shimano-style 20 spline bottom bracket tool.
Monty Pro Race graphics on the drive shell look great.
Please note: You must use a freewheel spacer between the freewheel and the bashring (or crank arm if you aren't using a bashring).
Available in 18t only.Weight: 175g
Freewheel width: 18.90mm
This freewheel must be bedded in before trials use, to ensure any excess grease used when assembling the freewheel works away from the mechanism. You can do this by riding the freewheel around 'normally' for a few hours, both freewheeling and engaging the mechanism gently. If the freewheel is subjected to trials use without having been bedded in, the pawls will not engage correctly and this causes the freewheel to skip, damaging the pawls and ratchet. Failure to bed the freewheel in correctly will void the warranty.